Downloadable Issues
2023/2 – Vol. 75. – Content
Masoud OSFOURI, SIMON Andrea
- https://doi.org/10.14382/epitoanyag-jsbcm.2023.07
Saad CHAIB, Lakhdar AZZOUZ, Benchaa BENABED
https://doi.org/10.14382/epitoanyag-jsbcm.2023.08
Chidozie Chimereze IKPA, Charles Chinwuba IKE, George Uwadiegwu ALANEME
- https://doi.org/10.14382/epitoanyag-jsbcm.2023.09
Tawfeeq W. MOHAMMED, Moafaq K.S. AL-GHEZI, Ibrahim A. ATEA
- https://doi.org/10.14382/epitoanyag-jsbcm.2023.10
Performance assessment of adsorbents based on natural bentonite for removal of cationic dye
Mazouri BELHADRI, Abdelkader BENGUEDDACH, Mohamed SASSI
- https://doi.org/10.14382/epitoanyag-jsbcm.2023.11
2023/1 – Vol. 75. – Content
Nadjat DJERFAF, Zahreddine NAFA, Akram Salah Eddine BELAIDI
- https://doi.org/10.14382/epitoanyag-jsbcm.2023.01
Negar Faramarzi FARD, Mohammad NIROUMAND
https://doi.org/10.14382/epitoanyag-jsbcm.2023.02
Steel fibre-reinforced concrete: review
Nehme SALEM, Abeidi AYMAN
- https://doi.org/10.14382/epitoanyag-jsbcm.2023.03
Anigilaje Bunyamin SALAHUDEEN
- https://doi.org/10.14382/epitoanyag-jsbcm.2023.04
Some features of clay structure transformation in course of clayey swelling process
Maxim G. KHRAMCHENKOV, Farida A. TROFIMOVA
- https://doi.org/10.14382/epitoanyag-jsbcm.2023.05
Using Hungarian andesite as a coarse aggregate for concrete
Ahmed M. SEYAM, Rita NEMES
- https://doi.org/10.14382/epitoanyag-jsbcm.2023.06
2022/6 – Vol. 74. – Content
Saad CHAIB, Lakhdar AZZOUZ, Benchaa BENABED
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.30
Shaymaa Abbas ABDULSADA, Ali I. AL-MOSAWI
https://doi.org/10.14382/epitoanyag-jsbcm.2022.31
George V. LISACHUK, Ruslan V. KRYVOBOK, Valentyna V. VOLOSHCHUK, Olena M. LAPUZINA
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.32
Hamed NAZARPOUR-FARD
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.33
Phase composition and microstructure
of ceramics made from kaolin mineral, alumina, and corn starch
Emese KUROVICS, Jamal-Eldin F. M. IBRAHIM, Mohammed TIHTIH, Emese SEBE
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.34
2022/5 – Vol. 74. – Content
Nabil Ahmed ABDULLAH, T. M. EL-SOKKARY, Mahmoud GHARIEB
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.25
Zdzisław PYTEL
https://doi.org/10.14382/epitoanyag-jsbcm.2022.26
Salem NEHME, Ayman ABEIDI
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.27
Ali I. AL-MOSAWI
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.28
Roland Kufre ETIM, Idorenyin Ndarake USANGA, David Ufot EKPO, Imoh Christopher ATTAH
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.29
2022/4 – Vol. 74. – Content
Sahra MAHI, Labri HAMMADI, Nasr-Eddine BOUDJENANE
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.19
Compressive strength optimisation of rice husk ash concrete using Scheffe’s mathematical model
Godwin A. AKEKE, Chidozie C. NNAJI, Udeme U. UDOKPOH
https://doi.org/10.14382/epitoanyag-jsbcm.2022.20
Rheological properties of clay-polymer systems: application on water-based drilling mud
Safaa HATHOUT, Larbi HAMMADI, Nasr-Eddine BOUDJENANE
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.21
Imoh Christopher ATTAH, Roland Kufre ETIM, David Ufot EKPO, Idorenyin Ndarake USANGA
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.22
Thuan Duc MAI, SEBE Emese, András Arnold KÁLLAY
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.23
Effect of water/cement ratio on cement hydration
László LACZKÓ, Ilona WOJNÁROVITSNÉ HRAPKA, Ferenc SPRÁNITZ
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.24
2022/3 – Vol. 74. – Content
Hoda S. ELDIN, Nabil A. ABDULLAH, Mahmoud F. ISMAIL, Ahmed I. HASHEM
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.13
Miloš R. VASIĆ
https://doi.org/10.14382/epitoanyag-jsbcm.2022.14
Sunday Edet ETUK, Ubong Williams ROBERT, Okechukwu Ebuka AGBASI, Sunday Samuel EKPO
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.15
Performance of self-compacting concrete in hot arid climate
Hachemi BENADDI, Bouzidi MEZGHICHE, Mohamed SALHI, Abdecharif BOUMAZA
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.16
M. Ezzat TAHA, Ayman M. KANDEEL, M. Ezzat El-FAKHARANY
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.17
H. M. KHATER, A. M. EL NAGAR
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.18
2022/2 – Vol. 74. – Content
Koray SOYGUN, Zafer ÖZER, Cem KURTOGLU, Amirullah M. MAMEDOV, Ekmel OZBAY
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.7
Geotechnical properties of lateritic soil stabilized with lignocellulosic biomass fly ash
Ezenwa C. AMANAMBA, Prince ORJI, Anthony EKELEME, Chukwuneduzor CHIOKE, Nnamdi NWASUKA
https://doi.org/10.14382/epitoanyag-jsbcm.2022.8
Band structures of metacomposite based phononic crystals in quasi-Sierpinski fractals
Oral OLTULU, Zafer OZER, Amirullah M. MAMEDOV, Ekmel OZBAY
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.9
Zine El-Abidine LAIDANI, Younes OULDKHAOUA, Mohamed SAHRAOUI, Benchaa BENABED
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.10
Digital image processing method for evaluation of discoloration on fair-faced concrete surfaces
Kitti AJTAYNÉ KÁROLYFI, András HORVÁTH, Ferenc PAPP
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.11
Ahmed ZIREGUE, Benharzallah KROBBA, M.Mouldi KHENFER, Rose-Marie DHEILLY, Justin HOUESSOU, Miche`le QUÉNEUDEC-T’KINT
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.12
2022/1 – Vol. 74. – Content
Ali I. AL-MOSAWI
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.1
Viscoelastic behavior of clay and slip used in ceramic
Souad HASSENE DAOUADJI, Larbi HAMMADI, Abdelkrim HAZZAB
https://doi.org/10.14382/epitoanyag-jsbcm.2022.2
Paul YOHANNAI, Roland K. ETIMI, Thomas S. IJIMDIYAI, Kolawole J. OSINUBII, John M. BUKI
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.3
Some engineering properties of sustainable selfcompacting mortar made with ceramic and glass powders
Aboubakeur BOUKHELKHAL, Hamdaoui ABDERRAMANE, Sebguig BELKACEM
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.4
Development a cement mortar based on dune sand used as an anti-carbonation coating of concrete
Youssef KORICHI, Ahmed MERAH, Med Mouldi KHENFER, Benharzallah KROBBA
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.5
K. SAAD, A. LENGYEL
- https://doi.org/10.14382/epitoanyag-jsbcm.2022.6
2021/4 – Vol. 73. – Content
Afanasy S. APKARIAN, László A. GÖMZE – Jamal-Eldin F. M. IBRAHIM – Sergei N. KULKOV
- https://doi.org/10.14382/epitoanyag-jsbcm.2021.19
In-situ carbonization of natural zeolite-alumina composite materials incorporated sawdust
Jamal-Eldin F. M. IBRAHIM – Afanasy S. APKARIAN – Mohammed TIHTIH – Sergei N. KULKOV – László A. GÖMZE
https://doi.org/10.14382/epitoanyag-jsbcm.2021.20
Study of transverse deformation of porous alumina during uniaxial mechanical tests
A. D. KASHIN – A. S. KULKOV – S. N. KULKOV – E. KUROVICS – L. A. GÖMZE
- https://doi.org/10.14382/epitoanyag-jsbcm.2021.21
Mechanical properties of mullite reinforced ceramics composite produced from kaolin and corn starch
Emese KUROVICS – Aleksey S. KULKOV – Jamal-Eldin F. M. IBRAHIM – A.D. KASHIN – Péter PALA, Veronika NAGY – Sergei N. KULKOV – László A. GÖMZE
- https://doi.org/10.14382/epitoanyag-jsbcm.2021.22
Stress-strain behavior of high porous zirconia ceramic
Irina N. SEVOSTIANOVA – Tatiana Yu. SABLINA – Sergei N. KULKOV – Mohammed TIHTIH – László A. GÖMZE
- https://doi.org/10.14382/epitoanyag-jsbcm.2021.23
Examination of the influence of cobalt substitution on the properties of barium titanate ceramics
Mohammed TIHTIH – Irina N. SEVOSTIANOVA – Emese KUROVICS – Tatiana Yu. SABLINA – Sergei N. KULKOV – László A. GÖMZE
- https://doi.org/10.14382/epitoanyag-jsbcm.2021.24
2021/3 – Vol. 73. – Content
Analytics of swelling potential on highly expansive (plastic) clayey soils behavior for sustainable admixture stabilization
Kennedy C. ONYELOWE, Michael E. ONYIA, Duc BUI VAN, Ali A. FIROOZI, Talal AMHADI
- https://doi.org/10.14382/epitoanyag-jsbcm.2021.13
Edidiong E. AMBROSE, Fidelis O. OKAFOR, Michael E. ONYIA
https://doi.org/10.14382/epitoanyag-jsbcm.2021.14
The influence of foundry wastes on the quality of autoclaved sand-lime materials
Zdzisław PYTEL
- https://doi.org/10.14382/epitoanyag-jsbcm.2021.15
Wind turbine blades structure based on palm cellulose fibers composite material
Abderraouf GHERISSI, Fahd ALAHMARI, Mohamed FADHL, Adnan ASIRI, Meshal ALHWITI, Omar ALAMRI, Metab ALANISI, Ibrahim NASRI
- https://doi.org/10.14382/epitoanyag-jsbcm.2021.16
Laboratory study of the effect of saturation degree on quality of fair-faced concrete surfaces
Kitti AJTAYNÉ KÁROLYFI, Ferenc PAPP
- https://doi.org/10.14382/epitoanyag-jsbcm.2021.17
Salim SAFIDDINE, Hamza SOUALHI, Benchaa BENABED, Akram Salah Eddine BELAIDI, El-Hadj KADRI
- https://doi.org/10.14382/epitoanyag-jsbcm.2021.18
2021/2 – Vol. 73. – Content
Antonio BOUTY, Farah HOMSI
- https://doi.org/10.14382/epitoanyag-jsbcm.2021.7
Evaluation of chloride resistance of silica fume and glass waste MWCNT- geopolymer composite
H. M. KHATER, Abdeen EL NAGGER
https://doi.org/10.14382/epitoanyag-jsbcm.2021.8
Hadeel Mahmood MUSSA, Tawfeeq Wasmi M. SALIH
- https://doi.org/10.14382/epitoanyag-jsbcm.2021.9
Effect of organoclay reinforcement on the mechanical and thermal properties of unsaturated polyester resin composites
Miguel Ibarra D. ABOBO, Loida D. RODRIGUEZ, Sonia D. SALVADOR, Henry C. SIY, David P. PENALOZA Jr.
- https://doi.org/10.14382/epitoanyag-jsbcm.2021.10
Rheological properties of a slip based on synthesized slavsonite and properties of ceramic materials based on it
G. V. LISACHUK, R. V. KRYVOBOK, A. V. ZAKHAROV, O. Yu. FEDORENKO, V. V. VOLOSHCHUK, M. A. ZHADKO, V. V. SARAI
- https://doi.org/10.14382/epitoanyag-jsbcm.2021.11
Shear behaviour of silicate-based structural adhesives for timber
Dániel CSANÁDY, Olivér FENYVESI
- https://doi.org/10.14382/epitoanyag-jsbcm.2021.12
2021/1 – Vol. 73. – Content
Ilyes BACHIR BELMEHDI, Abderrahmane MELLAK, Larbi HAMMADI
- https://doi.org/10.14382/epitoanyag-jsbcm.2021.1
Eleonora BUTENKO, Elena KAPUSTINA, Alexey KAPUSTIN
https://doi.org/10.14382/epitoanyag-jsbcm.2021.2
Infrared transmission and properties of glasses in the PbO–B2O3–SiO2–GeO2 system
Victor GOLEUS, Yurii HORDIEIEV
- https://doi.org/10.14382/epitoanyag-jsbcm.2021.3
Durability against carbonation of concrete formulated with partial replacement of cement with marble powder
Ahmed MERAH, Benharzallah KROBBA
- https://doi.org/10.14382/epitoanyag-jsbcm.2021.4
Synthesis and characterization of iron-doped GdMnO3 multiferroic ceramics
Jamal Eldin F. M. IBRAHIM, Ayhan MERGEN, Umut PARLAK, Emese KUROVICS, Mohammed TIHTIH, László A. GÖMZE
- https://doi.org/10.14382/epitoanyag-jsbcm.2021.5
Ouided HERIHIRI, Abdelhamid GUETTALA, Benchaa BENABED
- https://doi.org/10.14382/epitoanyag-jsbcm.2021.6
2020/6 – Vol. 72. – Content
Strength and consistency behaviour of replacement of cement with silicate-based geopolymer cement modified soft soil treated with crushed waste glasses for pavement underlain
Duc BUI VAN, Kennedy Chibuzor ONYELOWE, Michael ONYIA, Man NGUYEN XUAN, Lam DAO PHUC, Chidozie IKPA, Somjai YUBONCHIT, Adrian EBEREMU, Kolawole OSINUBI, A. Bunyamin SALAHUDEEN, Agapitus AMADI, Michael MADUABUCHI, Jesuborn OBIMBA-WOGU, Ifeanyichukwu ONUOHA, Zubair SAING
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.31
Malek ALI
https://doi.org/10.14382/epitoanyag-jsbcm.2020.32
Refractive index variations of glass microfragments by annealing – forensic applications
Tamás VÖRÖS, Krisztina TAKÁCS, Péter RÉGER
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.33
Formulation of predictive model for the compressive strength of oyster shell powder-cement concrete using Scheffe’s simplex lattice theory
Obiekwe A. UBACHUKWU, Fidelis O. OKAFOR
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.34
Mechanical properties of fly ash modified asphalt treated with crushed waste glasses as fillers for sustainable pavements
Kennedy C. ONYELOWE, Michael ONYIA, Eze R. ONUKWUGHA, Duc BUI VAN, Jesuborn OBIMBA-WOGU, Chidozie IKPA
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.35
Kennedy Chibuzor ONYELOWE, Michael E. ONYIA, Eze R. ONUKWUGHA, Oscar C. NNADI, Ifeanyichukwu C. ONUOHA, Fazal E. JALAL
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.36
2020/5 – Vol. 72. – Content
Aleksei V. PONARYADOV, Olga B. KOTOVA, Mohammed TIHTIH, Shiyong SUN
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.25
Analcime-bearing rocks as advanced sorbents
Dmitry A. SHUSHKOV, Olga B. KOTOVA, Jamal-Eldin F. M. IBRAHIM, Maria HARJ, László GÖMZE A., Tatyana N. SHCHEMELININA, Grigoriy V. IGNATIEV
https://doi.org/10.14382/epitoanyag-jsbcm.2020.26
Mohammed TIHTIH, Aleksei V. PONARYADOV, Jamal Eldin F. M. IBRAHIM, KUROVICS Emese, Elena L. KOTOVA, László GÖMZE A.
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.27
Wenlock-Ludlow boundary sediments on Chernov uplift (Arctic region of Russia)
Vladimir A. MATVEEV, Tatiana M. BEZNOSOVA, László GÖMZE A.
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.28
Insights into the applicability of the X-ray phase quantification supported by SEM for the rock-forming silicates minerals in the basaltic lava flows
Irina M. GEMBITSKAYA, Elena L. KOTOVA, Ilnur A. ABDRAKHMANOV, Emese KUROVICS, László GÖMZE A.
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.29
Electroacoustic properties of quartz minerals in a finely dispersed state
Leonid N. KOTOV, Elena L. KOTOVA, Ludmila GÖMZE N.
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.30

Aleksey S. AGEEV, László GÖMZE A., Oleg L. KOTOV
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.19
Haodong HUANG, Meng HE, Olga B. KOTOVA, Yevgeny GOLUBEV, Faqin DONG, László GÖMZE A., Emese KUROVICS, Rui LV, Shiyong Sun
https://doi.org/10.14382/epitoanyag-jsbcm.2020.20
Jamal-Eldin F. M. IBRAHIM, Dmitry A. SHUSHKOV, Emese KUROVICS, Mohammed TIHTIH, Olga B. KOTOVA, PALA Péter, László GÖMZE A.
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.21
Mineral composition of bauxite residue and their surface for innovation materials
Olga B. KOTOVA, Ilia N. RAZMYSLOV, Jamal Eldin F. M. IBRAHIM, Dmitry A. SHUSHKOV
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.22
Effect of bauxite grain size distribution on beneficiation and improvement of materials
Olga B. KOTOVA, Ilia N. RAZMYSLOV, Emese KUROVICS, Aleksandr I. LVOVSKY, László GÖMZE A.
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.23
Characterization of phase transformation and thermal behavior of Sedlecky Kaolin
Emese KUROVICS, Olga B. KOTOVA, Jamal Eldin F. M. IBRAHIM, Mohammed TIHTIH, Shiyong SUN, Péter PALA, László GÖMZE A.
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.24
Overview of ash as supplementary cementitious silicate-based composite and construction material
Kennedy Chibuzor ONYELOWE, Favour Adaugo Deborah ONYELOWE, Duc BUI VAN
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.13
Resilient modulus and deviatoric stress of cemented soils treated with crushed waste ceramics (CWC) for pavement subgrade construction
Kennedy Chibuzor ONYELOWE, Duc BUI VAN, Chidozie IKPA, Kolawole OSINUBI, Adrian EBEREMU, A. Bunyamin SALAHUDEEN, Oscar C. NNADI, Moses C. CHIMA, Jesuborn OBIMBA-WOGU, Kizito IBE, Benjamin UGORJI
https://doi.org/10.14382/epitoanyag-jsbcm.2020.14
The formation of phases with low or negative linear thermal expansion coefficient in porous mullite ceramics
Ludmila MAHNICKA-GOREMIKINA, Ruta SVINKA, Visvaldis SVINKA, Liga GRASE, Vadims GOREMIKINS
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.15
Effects of tunnel-fire on load bearing capacity of tunnel-lining and surrounding rock mass. Part 2 (Sectional Calculation)
Dániel CSANÁDY, Olivér FENYVESI, Tamás MEGYERI
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.16
An investigation into practical values of sound transmission loss across natural luffa fibers
Lamyaa Abd Alrahman JAWAD, Tawfeeq Wasmi M. SALIH
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.17
A comparative study of the modified phyllosilicate group of minerals isoprene for a new nanocomposite preparation
Fayq Hsan JABBAR, Emad Abbas Jaffar AL-MULLA, Wisam Hindawi HOIDY
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.18
Critical state desiccation induced shrinkage of biomass treated compacted soil as pavement foundation
- Kennedy C. ONYELOWE, Favour Deborah A. Onyelowe, Duc BUI VAN, A. Bunyamin SALAHUDEEN, Adrian O. EBEREMU, Kolawole J. OSINUBI, Agapitus A. AMADI, Eze ONUKWUGHA, Adegboyega O. ODUMADE, Ikechukwu C. CHIGBO, Zubair SAING, Chidozie IKPA, Talal AMHADI, Benjamin UGORJI, Michael MADUABUCHI, Kizito IBE
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.7
Rheology and strength of concrete made with recycled concrete aggregates as replacement of natural aggregates
- Zine-el-abidine TAHAR, Benchaa BENABED, El Hadj KADRI, Tien-Tung NGO, Adrien BOUVET
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.8
The role of explosive ordnance decontamination in the field of building trade
- EMBER István
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.9
Electrochemical characterization of polymeric sensor of poly-acrylonitrile self-modified with carbon nanotubes (CNT)
- Malia M. FARHAN, Muhammed Mizher RADHI, Younis M. YOUNIS
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.10
Potentials of calcined clay as a pozzolan
- Olasunkanmi Ayoola ADEKITAN, Mansur Oyenola POPOOLA
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.11
Thermal and mechanical properties of fabricated plaster of Paris filled with groundnut seed coat and waste newspaper materials for structural application
- Ubong Williams ROBERT, Sunday Edet ETUK, Asuquo Iboh UBONG, Grace Peter UMOREN, Okechukwu Ebuka AGBASI, Zaidoon Taha ABDULRAZZAQ
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.12
Strengthening of masonry walls with CFRP composite: experiments and numerical modeling
- Houria HERNOUNE – Benchaa BENABED – Madyan ALSHUGAA – Rajab ABOUSNINA – Abdelhamid GUETTALA
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.1
- Kennedy Chibuzor ONYELOWE – Duc BUI VAN – Lam DAO-PHUC – Favour ONYELOWE – Chidozie IKPA – Charles EZUGWU – A. Bunyamin SALAHUDEEN – Michael MADUABUCHI – Jesuborn OBIMBA-WOGU – Kizito IBE – Light IHENNA
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.2
- Shaymaa Abbas ABDULSADA – TÖRÖK I. Tamás
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.3
Material removal characteristics of Al-SiO2 composite in WEDM
- Subramaniam KUMARAVEL – Natarajan ALAGUMURTHI
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.4
Superficial hardening improvement of nano and micro composite Al TiC
- Abderraouf GHERISSI – Malik ALI
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.5
- Aleksandr URAKOV
- https://doi.org/10.14382/epitoanyag-jsbcm.2020.6
Synthesis of hydrogarnets in the system Al2O3∙2SiO2-SiO2-CaO-H2O under hydrothermal condition
- Zdzisław PYTEL
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.31
Rheological behaviour modelling of cement paste with nanotubes and plasticizer
- Gintautas SKRIPKIUNAS – Ekaterina KARPOVA – Mindaugas DAUKSYS
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.32
Sol-gel synthesis and structural characterization of Fe doped barium titanate nanoceramic
- Mohammed TIHTIH – Karoum LIMAME – Yahya ABABOU – Salaheddine SAYOURI – Jamal-Eldin F. M. IBRAHIM
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.33
Effect of H2 on SiO and SiC formation
- Trygve Storm AARNÆS – Merete TANGSTAD
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.34
- A. I. Al-MOSAWI – Kálmán MAROSSY
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.35
Rheology of natural hydraulic lime pastes modified by non-traditional biopolymeric admixtures
- Tomáš ŽIŽLAVSKÝ – Martin VYŠVAŘIL – Pavla ROVNANÍKOVÁ
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.36
- Mohammed H. AL – MAAMORI – Abbass A. HASHIM – Ali I. AL-MOSAWI – Shaymaa Abbas ABDULSADA – MAROSSY Kálmán
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.25
The effect of mechanical activation on the compressive strength of landfilled fly ash geopolymers
- AMBRUS Mária
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.26
- Younes OULDKHAOUA – Benchaa BENABED – Rajab ABOUSNINA – El-Hadj KADRI
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.27
- Maria Myrelle S. QUIAMBAO – Danilo D. LAPLANA – Miguel Ibarra D. ABOBO – Angelica G. JANCON – Sonia D. SALVADOR – Henry C. SIY – David P. PENALOZA Jr.
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.28
Student hostel for Turkish students
- MIKLÓS Gábor
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.29
Two approaches to the modelling of chip formation: rheological models and finite element analysis
- Jüri OLT, Olga LIIVAPUU
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.30
- Aboubakeur BOUKHELKHAL – Benchaa BENABED
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.19
- KUROVICS Emese, Olga B. KOTOVA, László GÖMZE A., Dmitry A. SHUSHKOV, Grigoriy V. IGNATIEV, Petr A. SITNIKOV, Yuri I. RYABKOV, Irina N. VASENEVA, Ludmila GÖMZE N.
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.20
- Jamal Eldin F. M. IBRAHIM – László GÖMZE A. – Olga B. KOTOVA – Tatyana N. SHCHEMELININA – Dmitry A. SHUSHKOV – Grigoriy V. IGNATIEV – Elena M. ANCHUGOVA
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.21
Composite materials based on zeolite-montmorillonite rocks and aluminosilicate wastes
- Olga B. KOTOVA – Dmitry A. SHUSHKOV – László GÖMZE A. – Emese KUROVICS – Grigoriy V. IGNATIEV – Petr A. SITNIKOV – Yuri I. RYABKOV – Irina N. VASENEVA
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.22
Clay- and zeolite-based biogeosorbents: modelling and properties
- Tatyana N. SHCHEMELININA – László GÖMZE A. – Olga B. KOTOVA – Jamal Eldin F. M. IBRAHIM – Dmitry A. SHUSHKOV – Maria HARJA – Grigoriy V. IGNATIEV – Elena M. ANCHUGOVA
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.23
Possibilities for reducing the permeability of normal and lightweight aggregate concrete
- László KÁLLAI – Dr. Olivér FENYVESI – Dániel CSANÁDY
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.24
Enhanced mechanical, thermal and barrier properties of clay-based polymer nanocomposite systems
- David P. PENALOZA Jr.
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.13
- Roderick Jesus Jude M. REGALADO – Emmanuel A. PUNZALAN – David P. PENALOZA Jr.
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.14
Sorption reseaches on the removal of the bond ammonia from the wastewater
- Eleonora BUTENKO
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.15
- Muhammed Mizher RADHI – Moaayad Jassim AL-HAYANI – Mohamed Flayyh TAREEF
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.16
Development of a laboratory scale continuous dry stirred
media mill
- Ádám RÁCZ – László TAMÁS
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.17
Preparation and synthesis of hydroxyapatite bio-ceramic from bovine bone by thermal heat treatment
- Hassanen L. JABER – Tünde Anna KOVÁCS
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.18
Performance of dolomitic cementitious mortars as a repairing material for normal concrete in Egypt
- M. E. EL-FAKHARANY – M. EZZAT – A. GAD – N. G. Abdel GHAFOUR – A. R. BAGHDADY
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.7
Rheological properties of NBR/CR blends as a function of silicon dioxide grain size gradation
- Ali I. AL-MOSAWI – Mohammed H. AL-MAAMORI – MAROSSY Kálmán
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.8
Technological parameters of ceramics creation on the basis of slavsonite
- G. V. LISASCHUK – R. V. KRYVOBOK – A. V. ZAKHAROV – E. V. CHEFRANOV – O. M. LAPUZINA – V. V. VOLOSHCHUK – N. N. SAMOILENKO
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.9
- Muhammed Mizher RADHI – Intesar Nadhum KHELKAL – Eman Natiq NAJI – Alaa Laebi ABDULLAH
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.10
Optimum limestone powder amount in mortars with over silica
fume
- Paki TURGUT, Abdullah OGRETMEN
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.11
Control of mechanical properties of lignite fly ash based geopolymers by vibrating compression
- SZABÓ Roland
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.12
Modeling of nonlinear viscoelastic polymeric materials at their large periodic deformation
- N. A. CHERPAKOVA – G. V. PYSHNOGRAI – P. FILIP – R. PIVOKONSKY
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.1
Modified clay for the synthesis of clay-based nanocomposites
- David P. PENALOZA Jr.
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.2
Mathematical modelling: case of Haoud Berkaoui
- Abderrahmane MELLAK
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.3
Fresh properties of the self-compacting highperformance concrete using recycled concrete aggregate
- Mohammed ABED – NEMES Rita
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.4
Upper Ludlowian-lower Pridolian stratigraphy, carbon isotope of the Timan-Northern Urals region
- Tatiana M. BEZNOSOVA – Vladimir A. MATVEEV – Lioubov V. SOKOLOVA
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.5
- Muhammed Mizher RADHI – Bahaa Fakhri HUSSEIN – Ahmed Adeeb MOHAMED
- https://doi.org/10.14382/epitoanyag-jsbcm.2019.6
Mining geology observations in the gabbro quarry at Szarvaskő Tardos
- János KLESPITZ
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.31
- Marek Stanisław WĘGLOWSKI – Adriana WRONA – Ilona NEJMAN – Maria RICHERT
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.32
- Hisham Mustafa Mohamed KHATER
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.33
- Sotaro BABA – Tomoyo GOTO – Sunghun CHO – Tohru SEKINO
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.34
- Seoyoung CHO – Csaba TÓTH – Zoltán SOÓS
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.35
Nanostructure and Surface Characteristic of Electrospun Carbon Black/PVDF Copolymer Nanocomposite
- Muhamad NASIR – Rana Ida SUGATRI – Putri Putih Puspa ASRI – Fitri DARA – ARDENISWAN
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.36
Copolymer electrode self-modified with fullerene C60
- Muhammed Mizher RADHI – Emad Abbas Jaffar AL-MULLA
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.25
Silylated functionalized montmorillonite clay for nanocomposite preparation
- David P. PENALOZA Jr. – Thomas AP SEERY
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.26
- Moustafa MOSBAH – Mohammed BENDOUKHA
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.27
Characteristics of cement pastes incorporating different amounts of waste cellular concrete powder
- Mohammed ABED – Rita NEMES
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.28
- Benchaa BENABED
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.29
The localization of plastic deformation in bimetal
- Yulia V. LI – Svetlana A. BARANNIKOVA – Lev B. ZUEV
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.30
- Blasius NGAYAKAMO – S. Eugene PARK
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.19
- Moustafa MOSBAH – Mohammed BENDOUKHA
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.20
- Manar Ghyath Abd-Almutalib AL-MOSAWY – Emad Abbas Jaffar AL-MULLA
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.21
Mass transfer of aluminum film from the surface of zeolite on the cathode
- N. N. LEBEDEVA – V. I. ORBUKH – G.M. EYVAZOVA – N. H. DARVISHOV – Ch. G. AKHUNDOV
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.22
Numerical study of building materials filled by PCM for thermal energy storage
- Youcef Oussama SOUCI – Samir HOUAT
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.23
- Jüri OLT – Viacheslav V. MAKSAROV – Aleksandr I. KEKSIN
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.24
Titanium-based composite synthesis in the combustion regime
- A. G. KNYAZEVA – G. A. PRIBYTKOV – Yu. A. CHUMAKOV
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.13
- Muhammed Mizher RADHI – Maysara Samer KHALAF – Zainab Oun ALI – Thamir Aboud AL-DABBAGH
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.14
Designing and Application of β-Cyclodextrin-based Copolymers for Remediation of Azo Dyes
- Fatima TARIQ – Uzaira RAFIQUE
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.15
Heat effected zone in unburned, antimony trioxide containing plasticised PVC
- Ali I. AL-MOSAWI – Kálmán MAROSSY
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.16
Intergrinding of materials with different grindability in Universal Hardgrove mill
- Éva GREGUS – Ádám RÁCZ – Barnabás CSŐKE
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.17
- Elshafie A. M. GAD – Amr Osman HABIB – Mahmoud M. MOUSA
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.18
Pre-surface preparation features when applying wear resistant composite sprayed coatings
- Jüri OLT – Viacheslav V. MAKSAROV – Victor A. KRASNYY
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.7
Rheological parameters of some soil samples before and after H2O2 treatment
- Dolgor KHAYDAPOV – Liesl WIESE – Andrei ROZANOV – Evgeny MILANOVSKIY
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.8
- Milan KRACALIK
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.9
- Shaymaa Abbas ABDULSADA – Tamás I. TÖRÖK – Éva FAZAKAS
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.10
Effects of tunnel-fire on load bearing capacity of tunnel-lining and surrounding rock mass
- CSANÁDY Dániel – FENYVESI Olivér – LUBLÓY Éva Eszter – MEGYERI Tamás
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.11
Influencing factors of the plate glass columns on the load bearing capacity
- András JAKAB – Salem Georges NEHME
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.12
Conference ic-rmm3 – where science met five continents
- Emese KUROVICS – Bronislav KANEV – Sergey SITKEVICH
Investigation of ceramic brick rods with blackened materials inside
- Emese KUROVICS – Sergei N. KULKOV – László A. GÖMZE
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.1
Investigation of mineralogical composition and technological properties of conventional brick clays
- László A. GÖMZE – Sergei N. KULKOV – Emese KUROVICS – Ales S. BUYAKOV – Svetlana P. BUYAKOVA – Alexandr Y. BUZIMOV – Róbert GÉBER – Mihail V. GRIGORIEV – István KOCSERHA – Aleksey S. KULKOV – Tatiana Yu. SABLINA – Nikolai L. SAVCHENKO – Irina N. SEVOSTYANOVA – Andrea SIMON
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.2
Development ceramic floor tiles with increased shear and pressure strengths
- László A. GÖMZE – Sergei N. KULKOV – Emese KUROVICS – Ales S. BUYAKOV – Alexandr Y. BUZIMOV – Mihail V. GRIGORIEV – Bronislav I. KANEV – Tatiana V. KOLMAKOVA – Ruslan V. LEVKOV – Sergey A. SITKEVICH
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.3
Deformation and fracture of alumina ceramics with hierarchical porosity
- Mihail V. GRIGORIEV – Nikolai L. SAVCHENKO – Tatiana Yu. SABLINA – Emese KUROVICS – Irina N. SEVOSTYANOVA – Svetlana P. BUYAKOVA – László A. GÖMZE – Sergei N. KULKOV
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.4
Effect of mechanical treatment on properties of Si-Al-O zeolites
- Alexandr Y. BUZIMOV – Wilhelm ECKL – László A. GÖMZE – István KOCSERHA – Emese KUROVICS – Aleksey S. KULKOV – Sergei N. KULKOV
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.5
Formation of Pore Structure in Zirconia-Alumina Ceramics
- Ales S. BUYAKOV – Ruslan V. LEVKOV – Svetlana P. BUYAKOVA – Emese KUROVICS – László A. GÖMZE – Sergei N. KULKOV
- https://doi.org/10.14382/epitoanyag-jsbcm.2018.6
Modeling of rheological and electro-chemical properties of hydrated clays
- Maxim G. KHRAMCHENKOV – Rustem M. USMANOV
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.19
From Nuclear to Cogeneration – How a natural disaster can change the policy of a country
- Abderrahmane MELLAK
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.20
Assessment of reinforcement in polymer nanocomposites using cumulative rheological parameters
- Milan KRACALIK
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.21
- Mohammed BENDOUKHA – Mustapha MOSBAH
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.22
On the deformation around holes described within a finite strain approach
- Martin LEDERER – Golta KHATIBI
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.23
Environment changes at the Ludlow and Pridoli boundary (Subpolar Urals)
- Bronislav I. KANEV – Tatiana M. BEZNOSOVA – Vladimir A. MATVEEV – László A. GÖMZE
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.24
- Tamás MAGYAR – József FAITLI – Roland SZABÓ
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.13
Assessment of the fresh selfcompacting concrete properties utilizing different types of additives
- Abdulkader EL MIR – Salem Georges NEHME
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.14
Utilization of aluminium dross as asphalt filler
- Zoltán SOÓS – Róbert GÉBER – Csaba TÓTH – Zsuzsanna IGAZVÖLGYI – Bella UDVARDI
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.15
- Fatima TARIQ – Uzaira RAFIQUE – Khurram YAQOOB
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.16
Synthesis and characterization of aluminosilicates [Zn3 (BTC)2] hybrid composite materials
- Nosheen AYUB – Uzaira RAFIQUE
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.17
- Elshafie A. M. GAD – Amr Osman HABIB – Mahmoud M. MOUSA
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.18
Compaction characeristics of lateritic soils stabilised with cement-calcined clay blends
- G. Matthew AYININOULA – O. Ayoola ADEKITAN
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.7
- Hisham Mustafa Mohamed KHATER – Hamdy A. ABDEL GAWWAD
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.8
Bentonite-based organoclays using chalcone and azo dye as organophilic reagents
- Manar Ghyath Abd-ALMUTALIB AL-MOSAWY – Emad Abbas Jaffar AL-MULLA – Majed Jari MOHAMAD
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.9
The effect of saturation degree of cement paste on fair-faced concrete surfaces
- Kitti KÁROLYFI
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.10
- Abdulkader EL MIR – Salem Georges NEHME
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.11
- Viacheslav MAKSAROV – Aleksey KHALIMONENKO – Jüri OLT
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.12
Nest-like BaO•6Fe2O3 microspheres with hierarchical porous structure for drug delivery
- S. TORRES-CADENAS – Alejandro BRAVO-PATINO – Juan ZARATE-MEDINA – Maria Eugenia CONTRERAS-GARCÍA
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.1
Titania-Ceria surfactant assisted sol-gel synthesis and characterization
- A. TORRES-ROMERO – M. CAJERO-JUÁREZ – M. E. CONTRERAS-GARCÍA
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.2
- Paulo H. R. BORGES – Aamer BHUTTA – Luiggi TEIXERIA BAVUZO – Nemkumar BANTHIA
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.3
Raman shift of silicon rubber-nano titania PMNC
- Sabah Mohammed Mlkat AL MUTOKI – Baydaa Abul Hassan Khalaf AL GHZAWI – Samir M. ABDUL AMOHSIN – Emad Abbas Jaffar AL-MULLA
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.4
- Muhammed Mizher RADHI – Yousif K. AL-HAIDARIE – Anfal Ismael IBRAHIM
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.5
- Sergey A. KINELOVSKII – Konstantin K. MAEVSKII
- https://dx.doi.org/10.14382/epitoanyag-jsbcm.2017.6
Rheological characterization of crude oil-water emulsions
- Roland NAGY – Andrea ELEKES – László BARTHA – Árpád VÁGÓ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2016.17
The adobe of Neolithic long houses and the following paleoenvironmental consequences
- János KALMÁR – Gábor KOCSIS-BURUZS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2016.18
- Aleksandr URAKOV – Natalia URAKOVA – Alexey RESHETNIKOV – Anton KASATKIN – Maxim KOPYLOV – Dmitry BAIMURZIN
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2016.19
- Alexey VERESCHAKA – Andrey KUTIN – Nikolay SITNIKOV – Gaik OGANYAN – Oleg SHARIPOV
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2016.20
- Gerardo Manuel RODRÍGUEZ TORRES – Juan ZARATE MEDINA – María Eugenia CONTRERAS GARCÍA
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2016.21
45S5 Bioglass porous scaffolds: structure, composition and bioactivity characterization
- ME ABAD-JAVIER – Marcos CAJERO-JUÁREZ – María Eugenia CONTRERAS GARCÍA
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2016.22
Structure and properties of ZrO2–MgO powders
- Svetlana P. BUYAKOV – Ekaterina S. KALATUR – Ales S. BUYAKOV – Sergei S. KULKOV
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2016.12
- Iliya ZHUKOV – Svetlana P. BUYAKOVA – Sergei S. KULKOV
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2016.13
Latest Updates and Developments on Self-Compacting Concrete. Report of Rilem Symposium 2016
- Abdulkader EL MIR – Salem Georges NEHME – Kinga NEHME
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2016.14
Mining geology observations in the dolomite quarry at Gánt felsőlegelő
- János KLESPITZ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2016.15
- Muhammed Mizher RADHI – Wasan A. Gharbi AL-DULIMY – Maysara Samer KHALAF
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2016.16
Rheological aspects of underground fluid dynamics and mass exchange processes
- Maxim KHRAMCHENKOV – Eduard KHRAMCHENKOV
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2016.6
Analysis of metakaolin as supplementary cementing material by the k-value concept
- Adorján BOROSNYÓI – Anna SZIJÁRTÓ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2016.7
- Alexander ISAEV – Vladimir GRECHISHNIKOV – Petr PIVKIN – Yuri ILYUKHIN – Mihail KOZOCHKIN – Pavel PERETYAGIN
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2016.8
Computer models of phase diagrams for ceramic systems. TiO2-SiO2-Al2O3 and ZrO2-SiO2-Al2O3
- Vasily LUTSYK – Anna ZELENAYA – Aleksandr ZYRYANOV – Edward NASRULIN
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2016.9
Mechanical activation of power station fly ash by grinding –
A review
- Gábor MUCSI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2016.10
- Lilla MLINÁRIK – Katalin KOPECSKÓ – Adorján BOROSNYÓI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2016.11
Enhancement of properties and biodegradability of polybutylene succinate by epoxidized palm oil
- Hassan Raheem Hammood AL-DUHAIDAHWI – Emad A. Jaffar AL-MULLA – Hana’a Addai ALI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2016.1
Reinforcement corrosion and concrete crack width
- Réka Anna NAGY – Adorján BOROSNYÓI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2016.2
- József SZEMÁN
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2016.3
In situ application of high and ultra high strength concrete
- Abdulkader EL MIR – Salem Georges NEHME – Kinga NEHME
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2016.4
Development of geopolymer based composite from secondaries
- Roland SZABÓ – Zoltán MOLNÁR – Tamás BALOGH – Richárd MÉSZÁROS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2016.5
Rheology of plasticized polymer solutions
- Saide O. UMEROVA – Iryna O. DULINA – Andrey V. RAGULYA
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.19
The effect of VIATOP® plus FEP on the stiffness and low temperature behaviour of hot mix asphalts
- Csaba TÓTH – Zoltán SOÓS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.20
Effect of Additives on the Rheological Properties of Fast Curing Epoxy Resins
- Youjiang WANG -Dildar Ali LAKHO – Donggang YAO
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.21
Towards the development of self-compacting no-slump concrete mixtures
- Hooman HOORNAHAD – Eduardus A. B. KOENDERS – Klaas van BREUGEL
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.22
Wettability of particles and its effect on liquid bridges in wet granular materials
- Hooman HOORNAHAD – Eduardus A. B. KOENDERS – Klaas van BREUGEL
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.23
- László A. GÖMZE – Ludmila N. GÖMZE – Sergey N. KULKOV – Igor SHABALIN – Irena GOTMAN – Fernando PEDRAZA – Giséle LECOMTE-NANA – Tatiana MAYOROVA – KUROVICS Emese – Alexandra HAMZA
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.24
Microrheology of Mucin: Tracking Particles and Helicobacter Pylori Bacteria
- Rama BANSIL – Joseph HARDCASTLE – Maira CONSTANTINO
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.25
Rheology and porosity effect on mechanical properties of zirconia ceramics
- Sergey N. KULKOV – Svetlana P. BUYAKOVA – Maria CHATZINIKOLAIDOU – István KOCSERHA
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.26
- Alexander SLOBODOV – Andrey USPENSKIY – Ricardas RALYS – Dmitriy KREMNEV
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.27
- Alexander SLOBODOV – Andrey USPENSKIY – Sergey YAVSHITS – Alexey MISCHENKO
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.28
Influence of electric arc furnace slag on characterisation of the produced geopolymer composites
- Hisham M. M. KHATER
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.13
High performance lightweight noise barrier with carbon fibre reinforced concrete
- Henrik FUNKE – Sandra GELBRICH – Lothar KROLL
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.14
Combined fire protection covers
- Csaba PÁKOZDI – Éva LUBLÓY – Olivér CZOBOLY
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.15
- Ayman M. KANDEEL
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.16
Review of the GPD2015 international glass conference in Finland
- JAKAB András – NEHME Kinga – Salem Georges NEHME
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.17
- Adorján BOROSNYÓI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.18
Characterization of alkali activated geopolymer mortar doped
- Hisham M. M. KHATER – Hamdy A. Abdel GAWWAD
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.7
Value analysis of waterproof membranes
- Fanni ANDRISKA – Dániel HEINCZ – Károly KOVÁCS – Gergely DOBSZAY – Rita NEMES
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.8
Effect of saturation degree of recycled aggregates on concrete properties
- Abdulkader El MIR – Gáspár BALCZÓ – Salem G. NEHME
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.9
Laboratory experiments of point fixed glasses
- Máté RÉNES – András JAKAB – Kinga NEHME – Salem G. NEHME
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.10
Opportunities in recycling AAC waste as aggregate for lightweight concrete
- Olivér FENYVESI – Bence JANKUS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.11
Influence of supplementary cementing materials on conventional
and self compacting concretes – Part. 2. Laboratory tests
- Salem Georges NEHME
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.12
- Aleksandr L. URAKOV
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.1
Brinell-hardness testing and discrete element modelling of hardened concrete
- Zoltán GYURKÓ – Adorján BOROSNYÓI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.2
- Patricia KARA
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.3
Ceramic radiotransparent materials on the basis of BaO-Al2O3-SiO2 and SrO-Al2O3-SiO2 systems
- Georgiy V. LISACHUK – Ruslan V. KRYVOBOK – Elena Y. FEDORENKO – Artem V. ZAKHAROV
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.4
Special topics in the freeze-thaw resistance of lightweight
- Rita NEMES
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.5
- Salem Georges NEHME
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.6
- Adorján BOROSNYÓI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.17
Formation of Catalyst Model Dispersed of Pd on a thin
MgO (100)
- Fatma BAARA – Abdelbaki CHEMAM
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.18
Performance of novel type three dimensionally deformed steel fibres for concrete
- Péter KEREKES – Adorján BOROSNYÓI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.19
Utilization of repair mortar for the loss compensation of Hungarian porous limestone
- Balázs SZEMEREY-KISS – Ákos TÖRÖK
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.20
Discrete Element Modelling of uniaxial compression test of hardened concrete
- Zoltán GYURKÓ – Katalin BAGI – Adorján BOROSNYÓI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.21
Image digitalization as a tool for processing experimental data of crack width of concrete
- Réka NAGY
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.22
- Ádám EGÉSZ – László GÖMZE A.
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.23
Review of the Glasstec 2014 exhibition in Düsseldorf
- András JAKAB – Kinga NEHME – Péter MOLNÁR – Salem Georges NEHME
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.24
Development of AlN ceramic composites for multilayer ceramic devices
- Iryna V. BRODNIKOVSKA – Andriy I. DERIY – Vitaly Ya. PETROVSKY
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.12
Computed tomography analysis and visual inspection of asphalt core samples
- Éva LUBLÓY – Tamás FÖLDES – Dávid AMBRUS – Kristóf KAPITÁNY – Árpád BARSI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.13
Cement kiln dust/rice husk ash as a low temperature route for wollastonite processing
- Emad M. M. EWAIS – Yasser M. Z. AHMED – Ahmed A. M.
EL-AMIR – Hamdy EL-DIDAMONY - http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.14
Thermal expansion of oxide systems on the basis of ZrO2
- Vladimir V. PROMAKHOV – Svetlana P. BUYAKOVA – Vanda ILLAVSZKY – Sergey N. KULKOV – László A. GÖMZE
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.15
- Adorján BOROSNYÓI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.16
- László A. GÖMZE – Sergey N. KULKOV – Adorján BOROSNYÓI
Porosity and Mechanical Properties of Zirconium Ceramics
- Ekaterina S. KALATUR – Svetlana P. BUYAKOVA – Sergey N. KULKOV – Irene GOTMAN – István KOCSERHA
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.6
The Influence of Temperature on the Properties of ZrW2O8
- Sergey N. KULKOV – Elena S. DEDOVA – Fernando PEDRAZA – János ERDÉLYI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.7
Foam Glass Ceramics as Composite Granulated Heat-Insulating Material
- Afanasy S. APKARYAN – Sergey N. KULKOV – László A. GÖMZE
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.8
The Influence of Porosity on the Elasticity and Strength of Alumina Ceramics
- Nikolai L. SAVCHENKO – Irina N. SEVOSTYANOVA – Tatiana Yu. SABLINA – Lucia MOLNÁR – Róbert GÉBER – László A. GÖMZE – Sergey N. KULKOV – Ludmila N. GÖMZE
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.9
- Mihail GRIGORIEV – László A. GÖMZE – Sergey N. KULKOV
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.10
Optimization of ceramic manufacturing process using Plackett-Burman design of experiment
- Ádám EGÉSZ – Svetlana P. BUYAKOVA – Sergey N. KULKOV – László A. GÖMZE
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.11
Structure and mechanical properties of ZrO2-based systems
- Sergey N. KULKOV – Svetlana P. BUYAKOVA – László A. GÖMZE
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.1
Bond of steel reinforcement in different lightweight aggregate concretes
- Rita NEMES – Bálint TÖRÖK
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.2
- Ádám RÁCZ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.3
- Patricija KARA – Adorján BOROSNYÓI – Olivér FENYVESI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.4
Mining geology observations in the granite quarry
at Erdősmecske
- János KLESPITZ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2014.5
Comparison of sorption properties of natural and synthetic takovites, Ni6Al2(OH)16CO3·4H2O
- Eleonora BUTENKO - David BISH – Galina ABROSIMOVA – Alexey KAPUSTIN
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2013.18
Studies on the spatial variability of rebound hammer test results recorded at in-situ testing
- Adorján BOROSNYÓI – Katalin SZILÁGYI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2013.19
Measurable properties of Al2O3 ceramic injection molding raw materials
- Ádám EGÉSZ – László GÖMZE A.
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2013.20
Experiments on the buckling behaviour of glass columns. Part 2.
- Kinga NEHME – András JAKAB – NEHME Salem G.
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2013.21
Simple basic model for concrete and its application
Part 3. Factors affecting consistency, material balance equations and mix design
- Gyula PEKÁR
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2013.22
Experiments on the buckling behaviour of glass columns. Part 1.
- Kinga NEHME - András JAKAB – Salem Georges NEHME
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2013.13
Comparison of the inherent variability in rebound hammer tests
performed with different testing instruments
- Katalin SZILÁGYI – Adorján BOROSNYÓI – Tamás MIKÓ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2013.14
Simple basic model for concrete and its application
2. Factors that influence compressive strength and drying
- Gyula PEKÁR
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2013.15
- Gabriella NÉMETH – Lilla MLINÁRIK – Ákos TÖRÖK
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2013.16
- Adorján BOROSNYÓI – Patricija KARA – Lilla MLINÁRIK – Karina KAŠE
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2013.17
Crystallization paths in SiO2-Al2O3-CaO system as a genotype of silicate materials
- Vasily LUTSYK – Anna ZELENAYA
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2013.7
Cu-Hf-Al amorphous/nanocrystalline composite particles produced by milling
- Mária SVÉDA – Márton BENKE – András ROÓSZ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2013.8
- Tamás MENDE – András ROÓSZ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2013.9
Abrasion resistance of lightweight aggregate concrete
- Rita NEMES
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2013.10
Romanesque and Gothic bricks from church in Pác – estimation of the firing temperature
- Igor ŠTUBNA – Rudolf PODOBA – Peter BAČÍK – Luboš PODOBNÍK
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2013.11
Simple basic model for concrete and its application
1. Content indicators of concrete mixtures and mixing plant observations
- Gyula PEKÁR
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2013.12
Mathematical analysis of capillary elevation in porous limestone
- Péter JUHÁSZ - Szilvia BÉLA - Katalin KOPECSKÓ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2013.1
Static hardness testing of porous mineral-based building
- Katalin SZILÁGYI - Adorján BOROSNYÓI - Zoltán GYURKÓ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2013.2
Typical problems in push-rod dilatometry analysis
- M. JANKULA - P. ŠÍN – R. PODOBA - J. ONDRUŠKA
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2013.3
Mineralogical and mechanical transformations in the bulk of a red mud tailing dam
- Ubul FÜGEDI - János KALMÁR
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2013.4
- BILGIN - YUCETURK - ARSLAN - BILGIN - POLAT
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2013.5
Corrosion resistant concrete structures with innovative Fibre Reinforced Polymer (FRP) materials
- Adorján BOROSNYÓI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2013.6
Study of steel fiber bond strength
- Katalin HALVAX – Éva LUBLÓY
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2012.7
DC conductivity of kaolin-based ceramics in the temperature
- Viera TRNOVCOVÁ – Rudolf PODOBA – Igor ŠTUBŇA
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2012.8
Examination of slipping layer during extrusion of clay-based
- István KOCSERHA – László GÖMZE A.
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2012.9
Analyzing the usability of mathematical methods in float glass manufacturing
- Árpád NAGY – Csilla PARÓCZAI – Andrea SIMON
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2012.10
The effect of thermal load in mechanical properties of a polymer
- Orsolya NÉMETH – Éva LUBLÓY – György FARKAS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2012.11
- László GÖMZE A. – Ludmila GÖMZE A. – István KOCSERHA – Róbert GÉBER
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2012.12
Fire protection of wood with intumescent coatings and impregnation
- Dávid ENCZEL – Éva LUBLÓY – István BÓDI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2012.13
Design of transport of particulate materials by fluid flow in pipelines
Part 2: Calculation of the pressure loss
- József FAITLI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2012.1
Development in hydrocyclone-construction
- Jenő NÉMETH – Sándor VERDES
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2012.2
Quarry-geological observations in the Komló andesite-pit
- János KLESPITZ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2012.3
Concrete with silica fume in fire
- Olivér CZOBOLY – Béla HARMAN – Éva LUBLÓY – György BALÁZS L. – Salem G. NEHME
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2012.4
Upgrading of TGA/DTA analyzer Derivatograph
- Rudolf PODOBA – Anton TRNÍK – Ľuboš PODOBNIK
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2012.5
Asphalt technological application of the neural network
- Tamás KONCSOS – Csaba TÓTH
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2012.6
Short presentation of life cycle of earth construction
- Ágnes O. CSICSELY
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2011.7
Thermal interactions between the Y-Ba-Cu-O based superconductors and ZrO2 substrates
- Dóra NÉMETH – Margit ENISZNÉ BÓDOGH
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2011.8
Controlling the structure and morphology of ZnS nanoparticles by manipulating the temperature
- Chan Gi LEE – Yusuke NAKAMURA – Hiroyuki NAKAMURA – Masato UEHARA – Hideaki MAEDA
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2011.9
Polymer derived ceramic foams with additional strut porosity
- Verena RESCHKE – Alexandra LASKOWSKY – Mathias KAPPA – Kaishi WANG – Rajendra K. BORDIA – Michael SCHEFFLER
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2011.10
Buildings and climate change: impacts on roofs and vulnerability to wind storms
- Sára Erzsébet HORVÁTH – Tamás PÁLVÖLGYI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2011.11
Possibilities and problems of the submicron dry grinding in stirred ball mill (Part II)
- Ádám RÁCZ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2011.12
- István ASZTALOS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2011.13
Alkaline activated inorganic polymers, as the new generation of binders
- Ildikó ZÁKÁNY – Tamás KORIM
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2011.14
Static indentation hardness testing of concrete: a long established
- Katalin SZILÁGYI – Adorján BOROSNYÓI – Kristóf DOBÓ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2011.1
Design of transport of particulate materials by fluid flow in pipelines
- József FAITLI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2011.2
Applying master curve at the grids strengthened asphalt structures
- Kornél ALMÁSSY – Csaba TÓTH
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2011.3
Durability of H-class cement and blast furnace slag-based cementitious composites
- María Teresa FUENTES ROMERO – Enrique ROCHA-RANGEL – Sebastián Diaz DE LA TORRE – Manuela DÍAZ CRUZ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2011.4
- Makhlouf BOUFATIT – Fettouma MOHAMMED-AZIZI – Soraya DIB
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2011.5
Development of hydraulic binder using industrial wastes
- Gábor MUCSI – Ákos DEBRECZENI – Viktor MÁDAI – Tímea DUDOK– Barnabás CSŐKE
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2011.6
Mechanical stress relaxation in hetero-modulus, hetero-viscous complex ceramic materials
- László A. GÖMZE – Ludmila N. GÖMZE
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2010.18
- Yves CHAPRON – Alain PORQUET – Montserrat FILELLA
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2010.19
Possible methods of optimising glass fibre production
- József SZEMÁN
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2010.20
The influence of Al2O3+Al powders stirring time on the quality of alumina based ceramics
- Anton KAYGORODOV – Vladimir KHRUSTOV
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2010.21
Fire safety questions of straw bale walls
- István Ferenc MÓDER – Éva LUBLÓY – Lajos Gábor TAKÁCS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2010.22
Sintering of Al2O3 ceramics based on different sizes powders
- Sergey N. KULKOV – Mihail V. GRIGORIEV
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2010.13
Crack width variation within the concrete cover of reinforced concrete members
- Adorján BOROSNYÓI – Iván SNÓBLI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2010.14
Alumina-based composites strengthened with titanium and titanium carbide dispersions
- Enrique ROCHA-RANGEL – David HERNÁNDEZ-SILVA – Eduardo TERRÉS-ROJAS – Enrique MARTÍNEZ-FRANCO – Sebastián DÍAZ-DE LA TORRE
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2010.15
Energy optimization of the grinding process in operating conditions
- Lajos NAGY
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2010.16
On permittivity of a stacking nano-faulty film
- Levan S. CHKHARTISHVILI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2010.17
Determination of KIIC stress intensity factor on new shape concrete specimens (Part II)
- Sándor FEHÉRVÁRI – Miklós GÁLOS – Salem G. NEHME
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2010.7
Effect of scandium additions on pressure less sintering of Al-TiN metal matrix composites
- Sarthak KHARE – Munish SHARMA – K. VENKATESWARLU
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2010.8
- Elenonora BUTENKO – Alexey KAPUSTIN
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2010.9
Possibilities and problems of the submicron dry grinding in stirred ball mill (Part I)
- Ádám RÁCZ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2010.10
- Nshan ZULUMYAN – Anna ISAHAKYAN- Hayk BEGLARYAN
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2010.11
Investigation of Central Anatolian region Nigde-Dikilitas (Turkey) clays by FTIR spectroscopy
- Burhan DAVARCIOGLU
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2010.12
Synthesis, microstructural analysis and mechanical properties of alumina-matrix cermets
- José G. MIRANDA-HERNÁNDEZ – Enrique ROCHA-RANGEL – Sebastián DÍAZ DE LA TORRE
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2010.1
Determination of KIIC stress intensity factor on new shape concrete specimens (Part I)
- Sándor FEHÉRVÁRI – Miklós GÁLOS – Salem G. NEHME
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2010.2
Photocatalytic properties of silica gel beads coated by Ag2O-V2O5
- Kiyoshi KURIBAYASHI – Daisuke OHMIYA
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2010.3
Study of edge strength of load bearing glasses
- Kinga PANKHARDT – György L. BALÁZS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2010.4
Changes of physical properties of asphalt aggregates by heat. A laboratory study
- Gabriella DEVECSERI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2010.5
Use of the fine powder of ornamental industry as ceramic raw material
- Farah Diba da SILVA – Felisbela Maria da Costa OLIVEIRA – Júlio César de SOUZA
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2010.6
- DIlija PLECAŠ – Slavko DIMOVIC
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.18
- J. G. CHIGVINADZE – J. V. ACRIVOS– S. M. ASHIMOV– D. D. GULAMOVA – T. V. MACHAIDZE – D. USKENBAEV
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.19
Detached determination of glasscorrosion of glass wool
- József SZEMÁN
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.20
- Kazutoshi KATAHIRA – Hitoshi OHMORI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.21
- Sándor FEHÉRVÁRI – Salem Georges NEHME
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.22
Quarry-geological observations in the Pécsvárad sand-pit
- János KLESPITZ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.23
- Günter FIEDERLING
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.24
Evolution of concrete industry, technology and science 1999-2008
- Adorján BOROSNYÓI – Tibor KAUSAY – András LIPTAY – Imre SZABÓ – Antal TÁPAI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.11
Development of the cement industry and the Cement Technical Division in the past decade
- Balázs BOCSKAY – Lajos RIESZ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.12
- Ervin SCHLEIFFER – Lajos TÓTH
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.13
Quality assurance of stone and gravel products
- Miklós GÁLOS – László KÁRPÁTI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.14
Heat insulation in the construction and assembling industry
- Péter REGENHART
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.15
- Aladár KATÓ – Gábor BEJCZI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.16
Challenges and results in the Hungarian glass manufacturing
- György LIPTÁK
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.17
High-temperature wear-resistant materials based on silicon nitride
- Natalia I. ERSHOVA – Irina Yu. KELINA
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.6
- László A. GÖMZE – Ludmila N. GÖMZE
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.7
Producing of concrete by using a dolomite waste as an alternative filler
- Aleksandrs KORJAKINS – Genadijs ŠAHMENKO – Diana BAJARE – Sergejs GAIDUKOS – Danuta PIZELE
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.8
The effect of the concrete components on the temperature endurance
- Sándor FEHÉRVÁRI – Salem Georges NEHME
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.9
- Kornél ALMÁSSY – Attila László JOÓ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.10
Improvement of OSC performance for CeZrO4 solid solution with Al2O3 diffusion barrier
- Akira MORIKAWA – Tadashi SUZUKI– Koichi KIKUTA – Akihiko SUDA – Hirofumi SHINJO
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.1
Rheological characteristics of alumina powders in dry pressing
- Judit CSÁNYI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.2
Mathematical modelling of transport phenomena in concrete porous
- Ilija PLECAŠ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.3
- Péter KÓNYA – Ferenc MÁDAI – Sándor SZAKÁLL
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.4
Sustainable and energy-conscious construction
- Erzsébet LÁNYI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2009.5
Self-compacting concrete with aggregate BARITMIX-1
- Zsolt SZENDREI – Bernadett NAGY – Salem Georges NEHME
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2008.15
Relations between the material structures and drying properties of ceramic bricks and roof tiles
- László A. GÖMZE – Ludmila N. GÖMZE
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2008.16
Effects of curing methods on plastic shrinkage concrete cracks
- Márton SÁROSI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2008.17
Magnetic cleaning of the Glass Industry’s Raw-Materials
- Csilla PARÓCZAI – János ERDÉLYI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2008.18
Rock physical characteristics of crushed stone products for
- Tibor KAUSAY
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2008.19
Wear Behavior of Zirconia-Bazed Ceramics under High-Speed Dry Sliding on Steel
- S. KULKOV – N. SAVCHENKO
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2008.10
mf-TMA of the green and fired heatproof ceramics Letovice
- Gabriel VARGA – Anton TRNÍK – Igor ŠTUBNA
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2008.11
- Jorg M. SCHRABBACK – István ASZTALOS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2008.12
Low NOx Burners for Glass Melting Furnaces
- Neil SIMPSON
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2008.13
Heat insulation and heat pump systems
- KOMLÓS Ferenc
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2008.14
- Ferenc KRISTÁLY – László GÖMZE A.
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2008.7
- Éva LUBLÓY – Rita NEMES – György BALÁZS L.
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2008.8
- Katalin SZILÁGYI – László GÖMZE A. – Gábor POLACSEK
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2008.9
Tungsten-carbide/cobalt based hard metals II.
- László LACZKÓ – Margit ENISZNÉ BÓDOGH
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2008.1
Blending of poly(ethylene) with recycled ground tire rubber and nanosilicate
- Béla KÁTAI – László MÉSZÁROS – Tamás BÁRÁNY
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2008.2
Dilatomery of stove tile ceramic material Letovice
- Gabriel VARGA – Igor ŠTUBNA
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2008.3
Impact of nitrogen atmosphere on sintering of alumina ceramics
- Judit TAMÁSNÉ CSÁNYI – László GÖMZE A.
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2008.4
The examination of recycling opportunity of mineral fillers as base materials in road construction
- Róbert GÉBER
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2008.5
Mineral based renders in our days
- László POZSONYI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2008.6
Cement chemistry and –technology issues in the production of low-chromate cements (I)
- Ludmilla OPOCZKY – László SAS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2007.14
Advanced shrinkage compensation of concretes by a combined admixture system
- Katalin SZILÁGYI – István ZSIGOVICS – Csaba SZAUTNER
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2007.15
Possibilities of dating ancient mortars from Hungary by using their „hydraulic factor”
- Éva KELEMEN – Péter RÓZSA
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2007.16
Glass wastes as basic material in the waste management of
- Klára TÓTHNÉ KISS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2007.17
The state of collection, handling and utilization of scrap glass in Hungary in 2007
- Géza KÁLNAI – Marcell KÁLNAI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2007.18
Structural solutions for waterproof concretes
- Attila FARSANG
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2007.19
Hardening process (I) of high-strenght self-compacting concretes
- Salem G. NEHME – Imre KOVÁCS – József KOVÁCS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2007.10
The selection of asphalt fi llers by the comparsion of hidrophile
- Róbert GÉBER
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2007.11
Reinforcing and rehabilitation of stone structures
- Piroska MARTINNÉ DÖRÖMBÖZI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2007.12
Determination of calibration intervals using control chart method II.
- József SZEMÁN
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2007.13
- Éva MARÓTI – János KALMÁR
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2007.5
Empirical modeling and determination of the grindability in stirred
- Viktória MANNHEIM
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2007.6
Grindability test for fine brittle materials
- Gábor MUCSI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2007.7
Mining-geological experiences in the Zalahaláp basalt quarry
- János KLESPITZ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2007.8
Development of blasting method and environmental protection in the quarry near Komló
- Sándor POZSÁR – Géza BOHUS – Szilvia BŐHM
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2007.9
Tungsten-carbide/cobalt based hard metals I.
Physical properties of tungsten-carbide powder and its manufacturing
- László LACZKÓ – Margit ENISZNÉ BÓDOGH
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2007.1
The structure of kaolinite and metakaolinite
- Gabriel VARGA
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2007.2
Determination of calibration intervals using control chart method I.
- József SZEMÁN
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2007.3
Design of engineering works related to the re-cultivation of the Pilismarót quarry
- Edina BAK – Miklós GÁLOS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2007.4
The effect of silica-acid-ester stone consolidants on coarse Limestone
- Zita PÁPAY – Ákos TÖRÖK
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2006.16
- Barnabás CSŐKE
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2006.17
Demonstration and application advantages of a stirred ball mill
- Viktória MANNHEIM
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2006.18
- Klára TÓTHNÉ KISS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2006.19
Requirements for crushed materials for roads
- Zoltán PUCHARD
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2006.20
„CORA” type gas-air mix firing system
- J. Dietl
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2006.21
Production of zinc ferrite in radiofrequency thermal plasma
- Loránd GÁL – Ilona MOHAI – János SZÉPVÖLGYI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2006.11
Examination of noise emission of crushers
- Edit KOCSIS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2006.12
Permaability of materials enhancing the water-tightness of concrete surface
- Erika CSÁNYI – Zsuzsanna JÓZSA – Ákos VARGA
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2006.13
Glass fiber insulation, trends, relationships, connections
- József SZEMÁN
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2006.14
Valuation of the applied micro-Deval test of aggregates for railway
- Endre ÁRPÁS – Gyula EMSZT – Miklós GÁLOS – László KÁRPÁTI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2006.15
- Tünde RÁDÓCZY – Kristóf KOVÁCS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2006.8
Residual compressive strength of lightweight aggregate concrete due to fire
- Éva MAJOROSNÉ LUBLÓY – Rita NEMES – György BALÁZS L. – Zsuzsanna JÓZSA
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2006.9
The thaumasite sulphate attack (TSA)
- Miklós RÉVAY – László LACZKÓ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2006.10
Ferroelectric ceramics I. – Theoretical background, materials and properties
- Tünde RÁDÓCZY – Kristóf KOVÁCS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2006.1
Investigation of kaolinite dehydroxylations is still interesting
- Igor ŠTUBNA – Gabriel VARGA – Anton TRNÍK
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2006.2
Effect of reducing materials on rheological and binding quality
- PAPP Krisztina
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2006.3
Effect of viscosity by the glass production
- József SZEMÁN
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2006.4
- G. BOYMANNS – F. GEBHHARDT – L. G. LIBAL – D. SCHLACHT
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2006.5
Dry insulating sheets for reparing of wet walls
- SMUDLA Mihály
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2006.6
- Veronika BOLCZEK – Tamás PÁLVÖLGYI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2006.7
Waste sampling and analysis in case of co-processing in the cement industry
- Gábor LESKÓ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2005.16
Production of chromate reduced cement at Danube-Drava Cement,
- Tamás FORDÁN
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2005.17
Burning of whole tyres in a wet technology cementplant
- Róbert SZABÓ – János BOA – Imre IKANOV
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2005.18
Dust binding in and out side of glass furnace particulary when batch is preheated
- Jaakko RISTOLA – Lászlóné FEHÉRVÁRI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2005.19
- Manfred SCHNORR
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2005.20
The stones in Mathias Church, decay and restoration
- Ákos TÖRÖK – Géza HAJNAL – Gyula EMSZT – Endre László ÁRPÁS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2005.12
Examination of noise emission of a centrifugal cruiser
- Gábor LADÁNYI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2005.13
Up-to-date procesing technologies for the production of quality sand-gravelraw materials
- József BŐHM – Barnabás CSŐKE – Balázs BŐHM – Sándor NAGY
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2005.14
The strategy of the Hungarian production of construction materials
- Tamás PÁLVÖLGYI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2005.15
Investigation of rheological properties of asphalt mixtures
- László GÖMZE A. – Ákos KOVÁCS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2005.7
Recycling building refuses for building- and road construction purposes
- Barnabás CSŐKE
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2005.8
Investigation of impact mill according to its Noise Emission (P 1.)
- Gábor LADÁNYI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2005.9
Effect of Co-burning on the clinckerproducing technology,
- Gábor LESKÓ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2005.10
Corrosions behaviour of grid-elements in Na-Ca-glassmelting furnaces
- F. BRUNK
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2005.11
Determination of some important size- and workingdata of ball mills with computer assistance
- Barnabás CSŐKE
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2005.1
Effect of some traceelements on cementklincker grinding
- Ludmilla OPOCZKY – Viktória GÁVEL
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2005.2
Rheological and binding properties of cements made with REA-Gips additives
- Krisztina PAPP – András JANKÓ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2005.3
Investigation of prevention possibilities of gehlenit formation in milten aluminacementklincker
- T. V. KUZNYECOVA – T. A. LJUTYIKOVA – Sz. V. SZAMCSENKO – A. I. VOROBJOV
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2005.4
Possibilities of the connected energy production: setting gasengines in the brick indusrty
- Géza MIHÁLYI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2005.5
The future of the Hungarian silicate industry, fundamentals,
possibilities
- Árpád KUNVÁRI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2005.6
Importance of particle size distribution in the manufacturing of fly ash blended cements
- Ludmilla OPOCZKY – Viktória GÁVEL
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2004.15
Mining geology experiences in the basalt quarry at Diszel
- János KLESPITZ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2004.16
Effect of ageing on the adhesion of mirror paint layers
- Ákos NAGY – Norbert HEGMAN
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2004.17
- Zsolt APAGYI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2004.18
Compressive strength testing of adobe wall
- Ágnes CSICSELY
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2004.19
Permeability testing of concrete surfaces
- Ákos VARGA
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2004.20
Joined ceramics, alias ceramic composites
- János SZÉPVÖLGYI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2004.11
Power demand of pan mills. Part 2.
- László A. GÖMZE
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2004.12
Bending strength investigation of some high purity Al2O3 technical ceramics
- Judit CSÁNYI – László A. GÖMZE – Zsuzsanna Ilona KÖVÉR
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2004.13
- Zsolt APAGYI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2004.14
Power demand of pan mills. Part 1.
- László A. GÖMZE
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2004.5
Adaptation of the silica refractory materials to glass melting furnaces
- Fred BRUNK
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2004.6
Cement, concrete and admixtures in the statistics
- István ASZTALOS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2004.7
- Zsolt APAGYI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2004.8
- András VELŐSY
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2004.9
Product, material and testing standards for the construction industry
- Csabáné SZENDY – László KUTASSY
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2004.10
Dispersion optimization of blended cements
- Miklós RÉVAY
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2004.1
Synthesis of nanopowders in thermoplasma
- János SZÉPVÖLGYI – Zoltán KÁROLY
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2004.2
- David E. PARKINSON – Lászlóné FEHÉRVÁRI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2004.3
- Zsolt APAGYI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2004.4
40 years of cement production in Vác
- Bálint SÁROS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.22
Actual topics in grinding theory – Grinding of plastic viscoelastic materials in pan mill
- László A. GÖMZE
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.23
Application of stress measurement methods in glass production
- István HORVÁTH – István SZABÓ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.24
Physical and mechanical investigation of adobe clays of various composition
- Péter BÜKI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.25
Ceramic microspheres prepared by thermal plasma
Zoltán KÁROLY – János SZÉPVÖLGYI – Zsuzsanna FARKAS
http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.9
Scratch testing of ceramic and china glazes
Nikoletta PUSKÁS
http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.10
Strength testing of natural stones by non-destructive methods
Miklós GÁLOS
http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.11
Vilmos Zsolnay “the greatest Hungarian potter”
János SEDIÁNSZKY
http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.12
Accreditation of testing laboratories
Dezső TÓTH
http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.13
The history of brick production in Vas county. Part 2.
Ferenc KOVÁCS
http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.14
Interactions of waste glass in the pore liquid of hardened
cement paste
Zsolt APAGYI – László CSETÉNYI
http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.15
Ceramic microspheres prepared by thermal plasma
- Zoltán KÁROLY – János SZÉPVÖLGYI – Zsuzsanna FARKAS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.9
Scratch testing of ceramic and china glazes
- Nikoletta PUSKÁS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.10
Strength testing of natural stones by non-destructive methods
- Miklós GÁLOS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.11
Vilmos Zsolnay “the greatest Hungarian potter”
- János SEDIÁNSZKY
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.12
Accreditation of testing laboratories
- Dezső TÓTH
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.13
The history of brick production in Vas county. Part 2.
- Ferenc KOVÁCS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.14
Interactions of waste glass in the pore liquid of hardened
cement paste
- Zsolt APAGYI – László CSETÉNYI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.15
Advantages of separate grinding during the manufacturing
of composite cements
- Ludmilla OPOCZKY – Viktória GÁVEL
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.1
Standardisation of building stones in the European standardisation system
- Tibor KAUSAY
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.2
Lightweigth aggregate made of waste glass
- László HOFFMANN – Zsuzsanna JÓZSA – Rita NEMES
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.3
Experiences with the new, continuously working ball mill at Zalakerámia Co.
- Mária CZÚGH – István BAKSA – Zsolt APAGYI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.4
- Gyula FREY
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.5
Adhesive materials with lifelong bonding
- Sándor FERENCZI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.6
The output of the building materials industry, I-III. quartal 2002
- László SZÉKELY
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.7
- Ferenc GLATZ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2003.8
The Los Angeles test in the European standardisation system
- Endre ÁRPÁS – Gyula EMSZT – Miklós GÁLOS – László KÁRPÁTI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.18
- József TALABÉR
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.19
30 years of modern cement production in Beremend
- Lajos KATONA – Lajos RIESZ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.20
Effect of admixtures on the shrinkage cracking tendency of cement paste
- György BALÁZS – Erika CSÁNYI – Péter GOMBOR
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.21
- Gábor MÁRKUS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.22
The history of brick production in Vas county. Part 1.
- Ferenc KOVÁCS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.23
Environmental policy and code of laws on environment protection before the EU entry
- Péter SIMONYI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.24
- Melinda NAGY – Leventéné KOTSIS – Éva MAKÓ – Attila VÉRTES – Zoltán KLENCSÁR
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.13
Effect of trace elements on the formation, crystal structure and characteristics of cement clinker
- Ludmilla OPOCZKY
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.14
Acoustic insulation – The advantageous properties of Ytong
walls
- József P. NAGY
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.15
Utilisation of perlite in the production of mortars for the construction industry
- László POZSONYI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.16
- Matthias KUNZ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.17
Effect of air pollution on coarse-grained limestone
- Nikoletta ROZGONYI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.6
The output of the building materials industry in 2001
- László SZÉKELY
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.7
Mining geology experiences in the sandstone quarry at Balatonrendes
- János KLESPITZ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.8
Development and prospective of modern perlite mining and preparatory process
- Géza FARKAS
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.9
Production of hydrothermally hardened walling materials from Balaton mud
- Csaba CSIZI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.10
Establishment of European cement standards in Hungary
- Miklós RÉVAY
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.11
Developing regulations for environment protection
- Gyula SZALÓKI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.12
Cement industry today and tomorrow
- Fritz FEIGE
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.1
Reflexions to the introduction of MSZ EN ISO/IEC 17025:2001 standard
- Dezső TÓTH
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.2
Adaptation of reaction kinetic characteristics to the estimation of durability of concrete
- Miklós RÉVAY
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.3
Formation of ring and sticky bulk in rotary kiln of clinker
production
- András JANKÓ
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.4
Application possibilities of high pressure roller mill in the cement industry
- Viktória GÁVEL – Zoltán HATVANI
- http://dx.doi.org/10.14382/epitoanyag-jsbcm.2002.5